patios Archives - Panther Pacific

Travertine Tile

Travertine Tile

Is a calcareous rock deposited from mineral springs.

It is a natural material that is formed by a process of rapid precipitation of calcium carbonate.

Typically the color is light, but it also comes in many varied colors such as yellow, brown, and tan.

Construction industry and architects have used it for decades. The Romans used it on their buildings and the Coliseum was almost completely built of travertine.

Travertine Tile is still favored for construction. It can be used for many applications such as floors, walls, kitchen backsplash and counters, and decorative accents.
Stone Tile Us natural stone can be used on: patios, pools, decks, bathroom, living rooms , other rooms, kitchen and more.

We offer free samples. Our premium quality stone direct from our factory will save you money.

Stone Tile Us has a large variety of natural stones.
We offer Travertine Tiles in the following sizes: 12″X24″, 18″X18″, 24″X24″

Finishes are: Tumbled, Honed and Filled, French Pattern Tumbled & Brushed and Chiseled.

Honed and Filled has a smooth and dull appearance . Also, has different degrees of dullness.

Polished stone is buffed to the most refined and highest level with a natural high shine.

Brushed and Chiseled : Is smooth surface and also Rustic edges.

Tumbled: Edges are rustic but less than chiseled finish.

Cleaners specifically made for natural stone or mild detergent be used clean surfaces.

Do not use vinegar, lemon juice, or any acid cleaner on travertine surfaces abrasive cleaners will affect the natural beauty.

Travertine tile

Has three grades:
1. Premium which has a small amount of filler
2. Standard more filler
3. Commercial has lots of filler.

Cut types are:

Vein Cut: Blocks are cut in vertical coats. Please review our Vein cut Polished Travertine Tile 12×24 Polished.

Cross Cut: Travertine blocks are extracted and and then cut in parallel coats.

Travertine is very strong and durable, great for outdoor use, and though expensive can increase the value of your property because of the quality.

Strong enough for outside and beautiful to use indoors.

Stone Tile Us ships everywhere and fast, check or flooring tile shipping policy.

Check our latest natural stone projects to help you visualize yours.

If you need more information about our natural stone selection, give us a call today 855-344-8716.

view post

TRAVERTINE PAVERS INSTALLATION

Stone Tile Us pavers are available in Marble and Travertine with finishes: tumbled, honed and filled. The finish on these stones are good for traction of vehicles and walking. The dense, hard material of travertine pavers makes them good for driveways, patios, pool and decks. They are resistant to moisture, cold, heat and erosion. There is no heat retention and its surface remains cool to the touch. We offer a good variety of colors and sizes to blend with your outdoor design.

Surface Preparation (Important)

Travertine pavers are durable, however, they are breakable so it’s important to properly prepare the surface. Pavers sized 6×12 are best for driveway to prevent cracking from the pressure of vehicles. Larger sizes, and French Pattern, are good for outdoor, deck and pool areas but not recommended for driveway use.

TRAVERTINE PAVERS INSTALLATION STEPS:

Dry-Set

Is highly recommended it is easy to lay and replace if needed and is the best option for cold weather.

Steps:

Excavate if needed

Compact (Soil has to have the correct moisture level)

Level, compact and repeat

Add 6” to 8” crushed limestone (sharp edges assist a snug fit) allows for good drainage.

Compact layers

Add the limestone in 2 -3 layers

Level compact and repeat

Top with ½” sand

Then lay pavers

Clearly define borders 6×12 Travertine Pavers

After pavers are in place Polymeric sand can be swept between cracks, grout, or they can be left alone

TRAVERTINE PAVERS INSTALLATION Mud-set

Uniform ground, surface/platform.

Excavate 6″ to 8″ of soil

Clear the area and create a level platform

Use a plate compactor to compact the soil

Fill area with crushed gravel (limestone base 3” to 4”)

Pour 4” concrete slab

Add mortar and lay the travertine pavers

Start from the edge of the driveway and work your way inwards.

Flexbond is recommended for cold weather mud set travertine paver installation that will be mud-set on top of a concrete surface.

It allows contraction and expansion during the extreme cold weather cycle as will as prevent cracking.

TRAVERTINE PAVERS INSTALLATION Sand set

Excavate the area and compact the soil.

Add a crushed limestone base 4” to 5”

Crushed limestone is a sure foundation, and will help the pavers stay in proper position while allowing proper drainage.

Add 1” to 2” of concrete sand over crushed limestone.

Lay pavers starting from the edge of the driveway and work your way in (use something like a concrete slab, to hold pavers in position during installation).

Pavers should be placed in a fitted pattern for good snug fit.

Fill the joints in with polymeric sand (usually a mix of sand & special additives that are used for filling paving stone joints).

Edging

It’s recommended to install landscape edging on the outside edge of the pavers this will keep them from shifting out of position (top of the edging must be level with the travertine paver edge)

An alternative is pouring concrete along the outside edge after tiles are set (top of the edging must be level with the travertine paver edge)

Finishes

Your outdoor travertine paver finish options are:

Tumbled finish, has textured, porous finish that is skid-resistant.

Honed is a smoother finish than tumbled but still has needed traction when wet.

Polished finish is smooth and should only be installed in covered outside areas porch patio etc…

TRAVERTINE PAVERS INSTALLATION Patterns

The pattern is up to you as there are several pattern/size options:

6×12, 8×8, 8×16, 12×12, 12×24, 16×16, 16×24, & 24×24

French pattern/mini-French pattern

Pattern repeats after the first square ends (tiles are 16″ by 24″, 16″ by 16″, 16″ by 8″ & 8″by 8″ pavers and is set to cover 16 sq. ft. area. You should place tiles close together and you should fill the joints with sand).

When pavers are set, check for level, go over the area with a plate compactor again.

Stone Tile Us ships everywhere and fast, check or flooring tile shipping policy.

Check our latest natural stone projects to help you visualize yours.

If you need more information about our natural stone selection, give us a call today 855-344-8716.

view post